Classic IO for DSMC3 RED APPROVED

Classic IO for DSMC3 RED KOMODO / KOMODO X & V-RAPTOR RED Approved.

MUTINY™ Classic IO

Our RED Approved Mutiny™ Classic IO is a port expander interface box for the RED KOMODO. KOMODO X and V-RAPTOR cameraS and is the most modular RED approved IO system available. Classic IO allows for Timecode, Genlock, Run Stop camera triggering (R/S), and RCP2 Control (SmallHD monitors). The Mutiny™ Classic IO is modular with almost unlimited mounting capabilities and cable options. With dual-sided 1/4-20 holes, three tether points, and a rotating 15mm rod clamp option, there are over a thousand mounting combinations for your rig. Perfect for gimbal ops and anyone who wants to wants to run light and tight on their setup. Classic IO is hand-assembled and tested in the USA. The MUTINY™ Classic IO has been used on blockbuster movies, television shows, commercials, documentaries, music videos, and indie films around the world.

*** Note you will need to also order a 9pin EXT cable unless you have one already. We have them in 6”, 9”, 18” fixed  right angle to straight or our high end adjustable 8 position right angle to right angle cables in 18”, 10” and 6” via this link IO EXT Cables  *** 

The Classic IO works with all standard triggers that have a Fischer 3 pin connector like our 15mm Rod trigger, Tilta Nucleus, Bright Tangerine R/S Top Rail for KOMODO, Preston, and many more*.

If using SmallHD Komodo control you will need this SmallHD Control Cable https://smallhd.com/products/red-ctrl-4-pin-to-smallhd-5-pin-usb-cable and SmallHD KOMODO Control Software to directly connect Mutiny IO to SmallHD Focus Pro, Cine 7, and 702 Touch monitors, etc.

The Mutiny™ IO is compatible with: 

SmallHD Focus, Indie 7, and Cine 7 series monitors (with KOMODO Control & DSMC3 Control RCP2 CTRL functions) via 4 Pin connector

Tentacle Sync (1st and 2nd Gen) & Sync E Recorder via 5 pin TC IN/OUT connector

Titla Nucleus Nano & M (R/S) triggering via 3 pin Fischer 3 R/S

Ambient (All Lockit Timecode / Sync products) via 5 pin TC IN/OUT & Genlock BNC

Preston MDR version 3 and 4 (R/S triggering) via 3 Pin Fischer R/S

C-Motion Via 3 Pin Fischer R/S

Teradek RT / RT motion via 3 pin Fischer R/S

Deneke SB series (all) and JB Series (all) timecode/sync boxes via 5 Pin TC IN/OUT

Most genlock, sync devices, and 5 pin timecode generators and readers 5 pin TC and BNC Genlock

The Mutiny™ Classic IO is RED Approved hardware so you have the confidence that it will work with your KOMODO or V-RAPTOR and meet their expectations. Classic IO comes with a Bongo Tie and 2x 1/4-20 screws for mounting.

NOTE: The Fischer 3 R/S run stop port does not provide power out. It is not an accessory port and is purely for camera triggering only.  It will work with virtually all run / stop buttons and wireless follow focus systems using he appropriate cable to Fischer 3 Pin.  Pin 1 is ground, Pin 2 is N/C, Pin 3 is GPO 3.3V/RS start stop